This includes fitting, chambering, and basic crown.  This prices does not include the cost of a new barrel.

Cleaning and squaring of receiver, bolt face, lapping locking lugs, threading, 

This packages improves on your factory rifle.  This package will get all you can our of your rifle without significantly changing parts.  With this package we will:

1. Lap the Bolt Lugs
2. Lap the barrel
3. Touch up the crown
4. Skim bed the action and free float the barrel
5. Install the customer supplied scope, lap the rings, and bore sight.

Customer supplied rifle will have the basic accuracy package performed to it.  The factory stock is replaced with one with a full length aluminum bedding block.  The rifle is then tested with a three shot 100 yard group shot with factory ammunition.

Highest level accuracy package on a customer supplied rifle.  The rifle is torn apart and the action and bolt is trued as much as possible.  A match grade barrel is installed and chambered.  The barrel will be a stainless barrel that can being matte finished or Cerakoted  The rifle then has the Basic and EFR packages performed to it.  Prices may vary slightly based on rifle models.  Different receiver models allows different levels of truing.

Barrel threading for suppressors, brakes, or flash hiders.  We require .100" over major diameter ensure proper fit.  

Example:

1/2-28=.600" minimum

9/16-24= .6625" minimum

5/8-24= .725" minimum

3/4-24= .850" minimum

Custom- .100" minimum

We are only cutting standard US RH threads at this time

Parts and labor included

Thread and install an oversized bolt knob.  Comes with standard tear drop knob, but other knobs available on request for additional charge